Opal

Home/Opal
  •   PROTEUS CLASSIC enables LED tape to be used in a multitude of applications which were previously prohibitive. The example below depicts PROTEUS CLASSIC used between ceramic floor tiles but a little imagination could give rise to a plethora of exciting examples.   For photometric data and elumdat files, please contact the sales office.
  •   PROTEUS CLASSIC RD has an infinite portfolio of architectural uses. Available as surface or recessed the round diffuser produces an extremely attractive visually illuminated line, the applications for which are limited only by the imagination of the designer. The light is available in white, colours or colour change.   For photometric data and elumdat files, please contact the sales office.
  •   PROTEUS LINE is a wide range of extruded aluminium profiles for continuous LED strip lighting applications for an infinite portfolio of architectural uses. For recessed applications there is a flanged version and the surface versions can be either fitted directly to the surface or mounted via the surface mounting bracket allowing a huge variety of applications limited only by the imagination of the designer.   For photometric data and elumdat files, please contact the sales office.
  •   PROTEUS LINE is a wide range of extruded aluminium profiles for continuous LED strip lighting applications for an infinite portfolio of architectural uses. For recessed applications there is a flanged version and the surface versions can be either fitted directly to the surface or mounted via the surface mounting bracket allowing a huge variety of applications limited only by the imagination of the designer.   For photometric data and elumdat files, please contact the sales office.
  •   PROTEUS CORNER works particularly well in any installation where the product is required to be mounted at an angle which allows light to gently wash across an adjacent surface. Cove lighting is a very good example of this. White, coloured or colour changing light is available together with frosted or clear diffusers.   For photometric data and elumdat files, please contact the sales office.
  •   Edge lighting of glass produces an absolutely stunning effect, even more so when using colour changing LED’s. 6mm thick glass sits within the extruded aluminium profile and LED strip sits immediately behind it and shines through the edge. Anything etched into the glass is picked out with light as is the opposite edge. Company logos, brand information or frankly anything that needs a wow factor will benefit from this technique. Clear glass allows light to pass straight through to the opposite edge and frosted glass illuminates the entire pane. PROTEUS GLASS is available in lengths of 1000mm or 2000mm.   For photometric data and elumdat files, please contact the sales office.
  •   PROTEUS GLASS 56 and 810 consist of two double anodized aluminium extrusions fitted with double sided mounting tape and a silicone cord for securely retaining and edge lighting glass panes and semi opalised plastics or acrylics. The familiar 6mm PROTEUS LED strip permits edge lighting and backlighting of partitions and feature panes. When combined with glass etching or sand blasted frosting, the architect is presented with a novel method of not only enhancing ambient illumination but also reinforcing branding and corporate identity through the use of coloured or colour changing LEDs.   For photometric data and elumdat files, please contact the sales office.
  •   PROTEUS MICRO has cross sectional dimensions of only 6mm x 5mm (max) making it perfect to be fitted into routed out sections in other materials allowing previously impossible illuminated sections to be fitted to a whole host of other products, limited only by the imagination of the designer. The product literally push fits into place.   For photometric data and elumdat files, please contact the sales office.
  •   PROTEUS STEP integrates LED strip lighting into the front edge of stairs in a way that was never before possible. Dual directional illumination is possible, in white or coloured LED light. PROTEUS STEP adds a unique new concept to the illumination of interior spaces.   For photometric data and elumdat files, please contact the sales office.
  •   PROTEUS WALKOVER is comprised of a sturdy outer aluminium extrusion and a sealed inner opalised extruded diffuser complete with gear tray to install the LED strip. By fully sealing the ends during installation, the product becomes IP67 rated, suitable for outdoor architectural recessed lighting.   For photometric data and elumdat files, please contact the sales office.
  •   PROTEUS PLASTER-IN as the name suggests allows the designer to create the appearance of a ‘slot’ of light in any plasterboard / drywall surface that requires a plastered finish. The flanged aluminium extrusion is mounted into the wall or ceiling and the plasterer will finish right up to the edge meaning there are no visible flanges.   For photometric data and elumdat files, please contact the sales office.
  •   PROTEUS WALL is provided as two extruded aluminium lengths, the first to be fixed directly to the surface and the second either in the form of a flat or angled fascia, to be fixed after the LED strip is installed. Dual directional discreet vertical illumination in bespoke lengths presents infinite opportunities to the architect. Available in all colours as well as tunable white and colour changing RGB.     For photometric data and elumdat files, please contact the sales office.
  •   Being made from PVC, PROTEUS FLEX allows light into many spaces previously considered inaccessible to the designer. The major features are that the product is flexible with a bending diameter of 10cm and it has no spotting. It therefore becomes a truly flexible solid line of light. Dimming, colours and DMX colour chasing are all possible options of this truly unique product.   For photometric data and elumdat files, please contact the sales office.
  • Datasheet

     
     

    Description

      MYTI is a shielded wall mounted IP66 rated external luminaire specifically designed to ensure the light is directed downwards towards ground level rather than ‘outwards’ as is so often the case with other traditional exterior luminaires which often create light pollution. In fact MYTI produces 97.5% of its distribution below the horizontal plane making it one of the most efficient luminaires of its type on the market. MYTI is suitable for rear cable entry and BESA box mounting, or for conduit and side cable entry. It is also available with DALI drivers and can be combined with a myriad of other sophisticated control equipment.  

    Photometric Files

    A selection of photometric files (.LDT) are available for download for registered users only. Please click the button below to register your details or fill in the form to log in.
    Register Here
    Existing Users Log In
       
    Due to the amount of different variations possible (size, lumen output, colour temperature, efficiency, control gear type etc), it is not possible to have photometric files for all permutations available for download on the website. Should you require additional photometric files for use within DIALux or other lighting design software packages, please contact the diVa sales office.
  •   VIRGIL LED houses component parts all sourced from well known European manufacturers, thereby offering peace of mind to the user. Designed to IP65, with a housing manufactured from powder coated die cast aluminium and a polycarbonate diffuser, VIRGIL LED is robust and vandal resistant and can be supplied with tamper resistant screws for more onerous areas. Every kind of control or emergency function is possible and can be specified within the part codes detailed below.     For photometric data and elumdat files, please contact the sales office.
  •   XANTHOS 1 LED houses component parts which all come from well known European manufacturers, thereby offering continuity and peace of  mind to the user. Designed to IP65, with a housing manufactured from powder coated die cast aluminium and a polycarbonate diffuser, XANTHOS 1 LED is robust and vandal resistant and can be supplied with tamper resistant screws for more onerous areas. There are 2 colour options and 3 cover options to choose from and an optional photocell or microwave sensor can also be fitted.   For photometric data and elumdat files, please contact the sales office.
  •   XANTHOS ECO houses component parts which all come from Tridonic or other European manufacturers, thereby offering continuity and peace of mind to the user. Designed to IP65 and with a housing manufactured from powder coated die cast aluminium and diffuser of polycarbonate, XANTHOS ECO is an economical alternative to the well known XANTHOS 1.   For photometric data and elumdat files, please contact the sales office.
  •   ACHILLES 2 is a shielded wall mounted luminaire suitable for environments where exterior directional lighting is required to reduce light pollution. The 90 degree adjustable housing can be fixed in a vertical position to offer a downward minimal ULOR distribution or angled purposefully to provide area flood lighting. ACHILLES 2 can be fitted with a dimmable driver and when combined with external lighting controls, it can offer the perfect solution to meet both energy saving and light pollution criteria.   For photometric data and elumdat files, please contact the sales office.
  •   FATES LED uses European branded square boards which produce a perfectly uniformly illuminated back-lit diffusing panel. The diffuser is attached using wish bone springs and a black light leak preventing gasket is utilised. Suitable for all common ceiling types, the FATES LED can be fitted with the latest generation chips achieving in excess of 180 lumens per watt. For photometric data and elumdat files, please contact the sales office.
  •   LIGHT LINE 50 offers the specifier the opportunity to manage the brightness of the working plane, walls and ceiling all within the requirements of LG7 whilst creating attractive, clean lines of light with or without uplight. Equally and very important to architects is the fact that the diffuser is continuous over longer lengths up to a maximum of 25m meaning there are no visible diffuser joints. The luminaire is suspended on wires that work through a clutch mechanism allowing for intricate and finite levelling. The housing is manufactured from extruded aluminium and the highly efficient opal diffuser provides the dual function of widespread distribution whilst controlling distracting glare and spotting.   For photometric data and elumdat files, please contact the sales office.
  •   LIGHT LINE 50 TRIMLESS is versatile in its makeup, as it can be made using LED boards or as part of the PROTEUS system using LED strip to provide continuous and spotless linear illumination. An initial recessed housing is installed into the plasterboard before the 50mm extruded aluminium housings is clipped into position using high tensile springs. A multitude of outputs and options are available including tunable white and RGBW.   For photometric data and elumdat files, please contact the sales office.

Title

Go to Top