PROTEUS PLASTER-IN

PROTEUS PLASTER-IN draws a slot of light in plasterboard with no visible trim: the 59mm profile is fixed into the wall or ceiling and its perforated wings are skimmed over, leaving only the 17mm opal line. A kit of parts: profile and diffuser, LED strip, then driver and controls, with end caps. Tell us the length; we size the rest.

59 x 13.6mm Trimless plaster-in profile

Up to19.2W/m LED strip load

Up to2,500lm/m LED strip (LLE-EX5/2500)

Trimless Plastered in, no visible flange

Profile 59 x 13.6mm (17mm slot, 21mm plaster wings), strip up to 16mm wide; 2000mm profiles (custom lengths to order) 827 · 830 · 840 · 930 · 940 · 827-865 Aluminium, silver anodised

Datasheet (PDF) PROTEUS LED kit builder

Applications

Offices Circulation areas Reception areas Retail Hospitality Residential

PROTEUS LED kit builder

Pick one option in each position. Every combination shown is a valid build.

Start here: your LED strip installation lengths

LED strip length (m)

Number of lengths

Number of drivers

Profiles come in standard lengths (2000mm; some profiles also 3000mm) and are cut to length on site. Profile, strip, end caps, clips, joiners and drivers below are all counted from your lengths; for different lengths, add each one to your schedule in turn.

1 Profile & diffuser

1 Profile

PROTEUS PLASTER-IN, PLASTER-IN, 59 x 13.6mm trimless

2 Length

2000mm profile

3 Finish

Aluminium, silver anodised

4 Diffuser

Opal diffuser

Profile code

2 LED strip

This profile takes LED strip up to 19.2 W/m and 16mm wide, with at least 120 LEDs per metre so the diffuser shows no spotting; only strips that fit are offered.

Strip code

3 Driver & controls

Driver code

Many other driver and control options are available: discuss with the diVa sales office.

4 Accessories

Code	Item	Quantity
PR/PLIN/EC	End cap, solid
PR/PLIN/ECH	End cap with cable hole (feed end)

5 Summary of component selection

Code	Item	Qty

Profile and diffuser (part 1) with its accessories. LED strip (part 2) and driver and controls (part 3) follow as their own lines. Fixed into the board and skimmed by the plasterer; drivers are remote.

Add to schedule

Free lighting design service Not sure which output? Send us the drawings. We lay out the scheme with PROTEUS PLASTER-IN, calculate it in Relux to EN 12464-1 and return marked-up plans with part codes.

Request a lighting design

Features

01Trimless plaster-in profile, 59 x 13.6mm
02Perforated wings, skimmed over: no visible flange
0317mm slot, opal flexible diffuser
04Takes 24 V LED strip up to 19.2 W/m and 16mm wide
05At least 120 LEDs/m, so no spotting on the diffuser
06Silver anodised; powder coated RAL to order
072000mm profiles as standard; custom lengths to order
08Remote driver: fixed output, DALI or Casambi

Specification

Colour options: 827, 830, 840, 930, 940, 827-865
Controls: Fixed output, DALI, Casambi (bDW); colour changing and tunable white: DT8, DMX, Casambi (bDW), RF
Emergency: Not available
Mounting: Plastered into plasterboard walls or ceilings (trimless)
Finish: AL Aluminium, silver anodised
Supply: 24 V DC SELV (driver 230 V 50 Hz)
Dimensions: Profile 59 x 13.6mm (17mm slot, 21mm plaster wings), strip up to 16mm wide; 2000mm profiles (custom lengths to order)
Warranty: 5 years

Control gear, standards & warranty

UKCA
CE
SELV 24 V

24 V DC SELV LED strip: use only with the SELV constant-voltage driver supplied in the kit. Drivers sized from the length (strip load + 20%): Tridonic fixed output or DALI (IP20), Meanwell HLG fixed output (IP67), Casambi wireless (bDW). Several lengths can share one driver.

Downloads

Datasheet PROTEUS-PLASTER-IN.pdf Open Download

Need photometric files, installation instructions or a BIM object not listed here? Ask our technical team.