PROTEUS DRIVEOVER

PROTEUS DRIVEOVER sets a line of light flush into driveways, car park entrances and forecourts: a 79 x 65mm in-ground aluminium profile with a glass top between stainless steel side bars over a sealed opal inner diffuser, made IP67 by sealing the ends on installation. A kit of parts: profile, glass and side bars, LED strip, then driver and controls. Tell us the length; we size the rest.

79 x 65mm In-ground profile

Up to19.2W/m LED strip load

Up to2,500lm/m LED strip (LLE-EX5/2500)

IP67 In-ground, drive over

Datasheet (PDF) PROTEUS LED kit builder Downloads

Applications

Driveways Car park entrances Forecourts Building exteriors Hotels & hospitality Retail

PROTEUS LED kit builder

Pick one option in each position. Every combination shown is a valid build.

Start here: your LED strip installation lengths

LED strip length (m)

Number of lengths

Number of drivers

Profiles come in standard lengths (2000mm; some profiles also 3000mm) and are cut to length on site. Profile, strip, end caps, clips, joiners and drivers below are all counted from your lengths; for different lengths, add each one to your schedule in turn.

1 Profile & diffuser

1 Profile

PROTEUS DRIVEOVER, 79 x 65mm

2 Length

2000mm profile

3 Finish

Aluminium, silver finish

4 Diffuser

Opal diffuser

Profile code

2 LED strip

This profile takes LED strip up to 19.2 W/m and 15.2mm wide; only strips that fit are offered.

Strip code

3 Driver & controls

Driver code

Many other driver and control options are available: discuss with the diVa sales office.

4 Accessories

Code	Item	Quantity
PR/DO/EC	Profile end cap, stainless steel
PR/DO/DEC	Diffuser end cap, silicone, solid
PR/DO/DECH	Diffuser end cap, silicone, cable hole
PR/DO/CG	Waterproof cable gland
PR/DO/GL	Glass top, 1000mm section
PR/DO/SB	Stainless steel side bar, 1000mm section

5 Summary of component selection

Code	Item	Qty

Profile and diffuser (part 1) with its accessories. LED strip (part 2) and driver and controls (part 3) follow as their own lines. IP68 waterproof connectors and junction boxes on request. IP67 is dependent on the installer ensuring a fully sealed installation (silicone sealant at the end caps and cable gland).

Add to schedule

Free lighting design service Not sure which output? Send us the drawings. We lay out the scheme with PROTEUS DRIVEOVER, calculate it in Relux to EN 12464-1 and return marked-up plans with part codes.

Request a lighting design

Features

0179 x 65mm in-ground aluminium profile, 39mm top
02Glass top between stainless steel side bars
03Sealed opal inner diffuser over the strip channel
04IP67 once the ends are sealed on installation
05Takes 24 V LED strip up to 19.2 W/m and 15.2mm wide
06Stainless steel end caps, silicone diffuser end caps
071000mm or 2000mm profiles as standard; custom to order
08Driver sized from the length: fixed, DALI or Casambi

Specification

IP: IP67
Colour options: 827, 830, 840, 860, 930, 940, 827-865
Controls: Fixed output, DALI, Casambi (bDW); colour changing and tunable white: DT8, DMX, Casambi (bDW), RF
Emergency: Not available
Mounting: Recessed flush in the ground (drive over); IP67 once the ends are sealed
Finish: AL Aluminium, silver finish
Supply: 24 V DC SELV (driver 230 V 50 Hz)
Dimensions: Profile 79 x 65mm (39mm glass top), strip up to 15.2mm wide; 1000mm or 2000mm profiles (custom lengths to order)
Warranty: 5 years

Control gear, standards & warranty

UKCA
CE
SELV 24 V
IP67

24 V DC SELV LED strip: use only with the SELV constant-voltage driver supplied in the kit. Drivers sized from the length (strip load + 20%): Tridonic fixed output or DALI (IP20), Meanwell HLG fixed output (IP67), Casambi wireless (bDW). Several lengths can share one driver.

Downloads

Datasheet PROTEUS-DRIVEOVER.pdf Open Download

Need photometric files, installation instructions or a BIM object not listed here? Ask our technical team.